Construction & finishing · Joiners
Workwear for joinery workshops with logo
Joiners work in two worlds: in the workshop milling, sanding and finishing furniture and doors – and at the customer's, when kitchens are fitted, built-in wardrobes installed or stair treads laid. In the workshop wood dust shapes the picture; at the customer's a well-kept appearance counts. Macherkleidung.de supplies team clothing for joineries that works in both situations.
- Printing included
- From 10 units
- €0 setup
- 5 working days
In short
At Macherkleidung.de, joineries get T-shirts, polos, sweatshirts, hoodies, jackets, work trousers, caps and beanies with a logo – from 10 units, printing included, with no setup fees. A printed T-shirt for your team starts at €5.50 excl. VAT, delivered in 5 working days after design approval.
How joineries work
The morning begins in the workshop – panel saw, router and sanding machines run, wood dust hangs in the air, varnish is applied. In the store, fittings and boards are prepared for today's installation job. In the afternoon the installation team drives to the customer, fits the new kitchen or hangs the bedroom wardrobes. The client watches and comments – the team should look confident and uniform. At the annual meeting with the architect or interior designer, joinery is a premium craft, and the clothing should reflect that.
Wood dust and varnish stains
Sanding and milling produce fine wood dust that settles into fabrics. Varnish splashes from spray application dry quickly. Dark fabrics with a cotton content show sanding dust less and wash out more easily than synthetic microfibres.
Reputable appearance at the private customer's
A kitchen installation at the customer's is a multi-day home visit. The installation team represents the joinery throughout the whole fitting process. Uniform clothing with a logo on the chest and back creates trust and clearly sets your team apart from other tradespeople.
Freedom of movement when fitting and drilling
Fixing cabinets overhead, drilling in tight corners and aligning door frames require full freedom for shoulders and arms. Clothing must not ride up at the back and must leave enough room at the armpits.
Robustness in everyday workshop life
In the workshop, clothing is exposed to increased friction, oil contact from machines and nail and screw points. Mid-weight, tightly woven fabrics with reinforcements in vulnerable places last much longer in everyday workshop life.
The outfit at a glance
| Product | Recommendation | from 10 units | from 100 units |
|---|---|---|---|
| T-shirts | F130 · Standard | €14.90 | €7.50 |
| Sweatshirts | F324 · Standard | €26.50 | €18.50 |
| Hoodies | BYBB001 · Standard | €22.90 | €14.90 |
| Polo shirts | TJ1405 · Premium | €42.50 | €31.90 |
| Softshell jackets | RG628 · Standard | €45.90 | €34.50 |
| Rain jackets | RT227 · Standard | €28.50 | €20.50 |
| Work trousers | RT308 · Standard | €39.90 | €31.90 |
| Caps | AT502 · Standard | €14.90 | €9.90 |
| Beanies | CB45 · Standard | €13.50 | €8.50 |
Per unit excl. VAT, printing included. The tier applies to the total quantity of your enquiry.
T-shirts for joinery workshops
The Fruit of the Loom F130 at 150 g/m² is the base layer for the workshop and light installation days.
Sweatshirts for joinery workshops
The Fruit of the Loom F324 at 280 g/m² is the workshop transition layer for cool mornings and winter operation, when the radiators are not yet warm.
Hoodies for joinery workshops
In the joinery the BYBB001 hoodie serves as break clothing and for delivery trips.
Polo shirts for joinery workshops
The Tee Jays TJ1405 Luxury Stretch Polo at 215 g/m² is the first choice for master joiners and the installation team on private customer visits.
Softshell jackets for joinery workshops
The Regatta RG628 softshell is the transitional jacket for the walk between vehicle and customer's home as well as for outdoor storage work.
Rain jackets for joinery workshops
For joineries that also take on outdoor work such as window installation, decking or carport cladding, the Result Core RT227 belongs in the vehicle.
Work trousers for joinery workshops
The Result Workguard RT308 at 270 g/m² in Black or Anthracite is the standard trousers for the workshop and customer installation.
Caps for joinery workshops
The Atlantis AT502 cap is practical protection against sanding dust in the hair in the workshop and sun protection on outdoor sites.
Beanies for joinery workshops
For winter operation in poorly heated workshop halls and for outdoor installations from November to March, the Beechfield CB45 is the simple, proven solution.
Ready-priced starter outfits
Workshop set · 5 people
Three T-shirts for a daily change in the workshop and one pair of work trousers – the lean initial kit for a pure workshop team without customer installation.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 15 | €14.90 | €223.50 |
| Work trousers RT308 | 5 | €39.90 | €199.50 |
| Total excl. VAT | 20 | €423.00 |
€84.60 excl. VAT per person · gross total €503.37
Workshop & installation · 5 people
T-shirts for the workshop, premium polo shirt for customer jobs and softshell jacket for field service – the complete set for joineries with an installation team.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 10 | €14.90 | €149.00 |
| Polo shirt TJ1405 | 5 | €42.50 | €212.50 |
| Softshell jacket RG628 | 5 | €45.90 | €229.50 |
| Total excl. VAT | 20 | €591.00 |
€118.20 excl. VAT per person · gross total €703.29
Colours and logo
Anthracite and black are the most professional colours in the joinery trade for customer jobs and show wood dust and varnish splashes least. Navy is a classic alternative with a more traditional craft look.
Anthracite on the F130
- Light Graphite (Solid)
Black on the F130
- Black
Navy on the F130
- Deep Navy
- Heather Navy
- Navy
For workshop teams we recommend direct print on T-shirts and sweatshirts – inexpensive, durable in workshop washing and visible on the back during customer jobs. For the master and the installation team, an embroidered logo on the polo shirt is worthwhile, leaving a high-quality impression at the customer's and during architect visits.
Delivery time
How your order works
- Put together your needsChoose products, colours and approximate quantities – sizes can stay open for now.
- Estimate or enquirySave a PDF for internal approval or send it straight to us for review.
- Personal reviewWe check stock, logo and deadline. Production only starts after your written approval.
Frequently asked questions from joineries
Which model do you recommend for joiners at a private customer's?
For customer jobs we recommend the premium polo shirt Tee Jays TJ1405 with an embroidered logo. The stretch quality allows full freedom of movement when fitting, and the higher-quality material leaves a better impression than a standard T-shirt. For the workshop, the standard model remains the more economical choice.
How big should the back design on joiner team clothing be?
That depends on the print design – for back print we recommend aiming for legibility from a medium distance. Company name large, optional slogan or web address smaller underneath. At design approval we check whether the design is suitable for printing and give you feedback.
Can we equip the workshop and installation teams with the same clothing?
Yes – a uniform appearance in both areas strengthens the company identity. Alternatively, you can choose a premium polo shirt for the installation team and the standard T-shirt for the workshop – both in one enquiry, with the total quantity determining the tier.
How quickly can we order for a trade fair appearance or an exhibition?
5 working days from design approval. If you already have the logo print-ready as a vector file, approval is quick. If needed there is 48-hour express (+25 %) or 24-hour express (+50 %).
Do you also offer embroidery for joiners' polo shirts?
Yes – on polo shirts the chest logo is embroidered or printed as standard, depending on your wish. Embroidery is more durable and looks more professional than print on higher-quality clothing such as the Tee Jays polo shirt. You can state your preference when you make the enquiry.
Related industries
Put together teamwear for joinery workshops
Put together your needs online and see the estimate instantly. Sizes can stay open – we check everything personally before production.