Construction & finishing · Drywall installer
Workwear for drywall installers with logo
Drywall installers erect stud walls, board them with plasterboard and fit suspended ceilings in office buildings, flats and industrial halls. Plaster dust is their constant companion, and mineral wool leaves an itch on the skin and fibres in the fabric. Macherkleidung.de supplies team clothing for drywall companies that works on shell construction sites and looks professional to the client.
- Printing included
- From 10 units
- €0 setup
- 5 working days
In short
At Macherkleidung.de, drywall companies get T-shirts, polos, sweatshirts, hoodies, jackets, work trousers, caps and beanies with a logo – from 10 units, printing included, with no setup fees. A printed T-shirt for your team starts at €5.50 excl. VAT, delivered in 5 working days after design approval.
How drywall companies work
The morning begins on a new-build site: metal studs are set up and screwed according to the plan, the first layer of plasterboard is cut and fixed. When cutting the boards with a utility knife or jigsaw, fine plaster dust is produced that settles into every fabric within hours and leaves it white. When processing mineral wool in the wall and ceiling, fibres spread through the air – onto sleeves and collars. When filling the board joints, further splashes occur. In the afternoon, when the site manager does the progress inspection, the team should look recognisable and uniform.
Tolerance of plaster dust
Cutting and boarding plasterboard produces fine white dust that settles into all fabrics. Darker fabrics make this dust look less dramatic; coarse weaves shake it off more easily when beaten out than fine microfibres.
Fibre protection when working with mineral wool
When installing mineral wool insulation boards, fibres spread through the air and settle on clothing and skin. Close-fitting sleeves and a T-shirt collar protect the forearms better than loose, dust-raising garments. Change and wash clothing immediately after contact with mineral wool.
Work in different construction phases and temperatures
In shell construction in winter it is cold in the unconditioned shell; in summer on the same floor it is tropically hot. A layering system of T-shirt and sweatshirt covers both extremes.
Visibility compared with other trades
On an active building site with electricians, painters and plumbing teams, uniform company clothing allows quick identification. For site managers and general contractors, a recognisable drywall team is a sign of professional company organisation.
The outfit at a glance
| Product | Recommendation | from 10 units | from 100 units |
|---|---|---|---|
| T-shirts | F130 · Standard | €14.90 | €7.50 |
| Sweatshirts | F324 · Standard | €26.50 | €18.50 |
| Hoodies | BYBB001 · Standard | €22.90 | €14.90 |
| Polo shirts | BCPUI10 · Standard | €20.50 | €12.90 |
| Softshell jackets | RG628 · Standard | €45.90 | €34.50 |
| Rain jackets | RT227 · Standard | €28.50 | €20.50 |
| Work trousers | RT308 · Standard | €39.90 | €31.90 |
| Caps | AT502 · Standard | €14.90 | €9.90 |
| Beanies | CB45 · Standard | €13.50 | €8.50 |
Per unit excl. VAT, printing included. The tier applies to the total quantity of your enquiry.
T-shirts for drywall installers
The Fruit of the Loom F130 at 150 g/m² is the workhorse for plasterboard fixing, stud-frame assembly and filling work.
Sweatshirts for drywall installers
The Fruit of the Loom F324 at 280 g/m² in Heather Grey is the right warm layer for winter shell constructions and cold flat renovations.
Hoodies for drywall installers
For drywall installers the BYBB001 hoodie is the clothing for breaks, trips and colder transitional days without direct plaster work.
Polo shirts for drywall installers
The B&C BCPUI10 polo shirt is the right clothing in drywall for site managers, foremen and client appointments.
Softshell jackets for drywall installers
The Regatta RG628 softshell is the transitional jacket for drywall installers between vehicle and building site as well as for winter breaks and outdoor storage.
Rain jackets for drywall installers
Drywall installers work almost exclusively indoors, which is why the rain jacket is used less often than in other building trades.
Work trousers for drywall installers
The Result Workguard RT308 at 270 g/m² in Grey or Black is ideal for drywall installers: knee-protection inserts for floor-level work, deep pockets for utility knives and plasterboard anchors and robust fabric for daily contact with the building site.
Caps for drywall installers
When cutting plaster and working on ceilings, the Atlantis AT502 cap protects eyes and hair from falling plaster particles.
Beanies for drywall installers
For winter shell constructions and cold storage work in January, the Beechfield CB45 in Graphite Grey or Charcoal is the simple, inexpensive addition to the annual kit.
Ready-priced starter outfits
Shell construction starter set · 6 people
Three T-shirts for a daily change with plaster dust and a softshell jacket for cold shell construction breaks – the lean basic set for a drywall team.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 18 | €14.90 | €268.20 |
| Softshell jacket RG628 | 6 | €45.90 | €275.40 |
| Total excl. VAT | 24 | €543.60 |
€90.60 excl. VAT per person · gross total €646.88
Full drywall kit · 6 people
T-shirt base, sweatshirt for winter shell constructions, work trousers with knee protection for floor-level work and cap for ceiling installation – the complete annual kit for a drywall team.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 12 | €11.50 | €138.00 |
| Sweatshirt F324 | 6 | €22.90 | €137.40 |
| Work trousers RT308 | 6 | €36.50 | €219.00 |
| Cap AT502 | 6 | €12.50 | €75.00 |
| Total excl. VAT | 30 | €569.40 |
€94.90 excl. VAT per person · gross total €677.59
Colours and logo
Grey and anthracite match the plaster-dust look of drywall and make white dust look less dominant than navy or black. White is the bold variant, which communicates the trade directly – plaster dust is then deliberately part of the look.
Grey on the F130
- Heather Grey
- Light Graphite (Solid)
- Zinc (Solid)
Anthracite on the F130
- Light Graphite (Solid)
White on the F130
- White
For drywall teams we recommend direct print on T-shirts and sweatshirts with the company name on the back – the logo is visible to site managers and other trades when boarding, even when you stand with your back to the wall. On polo shirts for client appointments an embroidered logo is worthwhile, surviving plaster-dust washes for longer.
Delivery time
How your order works
- Put together your needsChoose products, colours and approximate quantities – sizes can stay open for now.
- Estimate or enquirySave a PDF for internal approval or send it straight to us for review.
- Personal reviewWe check stock, logo and deadline. Production only starts after your written approval.
Frequently asked questions from drywall companies
How do I get plaster dust out of team clothing?
Plaster dust can usually be washed out well – it is water-soluble and is rinsed out in a normal wash. It is important to wash the clothing as soon as possible, before the dust bakes deep into the fibres. Please always follow the care label so as not to damage the print and the fabric.
Do drywall installers need PPE when working with mineral wool?
Yes – when processing mineral wool, respiratory protection (at least FFP1) and safety glasses are mandatory, as mineral fibres can irritate the airways. This PPE is not part of our range. Our team clothing complements required protective equipment but does not replace it.
Which colour do you recommend for drywall teams?
Grey and anthracite are the most practical colours, because plaster dust appears in similar shades and looks visually less dominant on these colours. Anyone who wants to make a deliberate trade statement with white T-shirts can do so – plaster dust then becomes visually part of the trade's image.
Can we also order clothing for foremen and supervisors separately from the fitter team?
Yes – different models can be combined in one enquiry. Foremen get e.g. polo shirts with an embroidered logo, fitters standard T-shirts. The total quantity of all items determines the tier price level.
We are starting a new project with 12 people – how do we approach the order?
Put together your needs online – T-shirts, trousers, jackets – and get a PDF guide price. Sizes do not have to be fixed yet. Then we check stock, logo and schedule, you approve in writing, and we deliver in 5 working days. From 50 pieces the price drops noticeably.
Related industries
Put together teamwear for drywall installers
Put together your needs online and see the estimate instantly. Sizes can stay open – we check everything personally before production.