Construction & finishing · Plumbing and heating specialist
Workwear for plumbing and heating companies with logo
Plumbers and heating engineers work in cellars, bathrooms and plant rooms every day – laying copper and plastic pipes, installing heating systems and replacing thermostatic valves. Customer contact is intense: emergency call-outs ring the customer's doorbell, bathroom installations take days. Macherkleidung.de supplies uniform team clothing for plumbing and heating companies that survives limescale splashes and looks professional at the customer's.
- Printing included
- From 10 units
- €0 setup
- 5 working days
In short
At Macherkleidung.de, plumbing and heating companies get T-shirts, polos, sweatshirts, hoodies, jackets, work trousers, caps and beanies with a logo – from 10 units, printing included, with no setup fees. A printed T-shirt for your team starts at €5.50 excl. VAT, delivered in 5 working days after design approval.
How plumbing and heating companies work
The morning begins with loading the service vehicle – pipes, fittings, taps and tools for today's jobs. At the first customer a gas boiler is serviced; corrosion residue from the heat exchanger ends up on the sleeve. On the second job a bathroom is being converted – chiselling out tiles, laying pipes, disconnecting old installations. In the afternoon a heating emergency follows: the customer waits nervously, and the team that arrives signals at once through uniform clothing: this is the specialist company they called. In winter the share of emergency call-outs is particularly high.
Resistance to limescale, rust and pipe grease
Limescale from old taps, rust from corroded pipes and hemp sealing thread leave typical plumbing stains on sleeves and trouser legs. Dark fabrics with a cotton content show this dirt least and can be washed warmer.
Building trust with the emergency customer
A plumbing and heating company turning up after a burst water pipe is immediately checked for credibility by anxious customers. Uniform clothing with company name and logo creates in seconds the proof of trust that an individual in private clothes has to build up laboriously.
Knee protection for floor-level work
Siphons under washbasins, sealing a bath and laying heating pipes in the cellar require intensive use of the knees. Work trousers with knee-pad pockets for insert pads are much kinder to the knees in everyday plumbing work than normal trousers.
Layering ability for cellars and outdoor jobs
In summer the cellar is cold and the loft hot – in winter it is the other way round. A system of T-shirt and sweatshirt lets the team react flexibly to room temperature without changing clothes.
The outfit at a glance
| Product | Recommendation | from 10 units | from 100 units |
|---|---|---|---|
| T-shirts | F130 · Standard | €14.90 | €7.50 |
| Sweatshirts | F324 · Standard | €26.50 | €18.50 |
| Hoodies | BYBB001 · Standard | €22.90 | €14.90 |
| Polo shirts | BCPUI10 · Standard | €20.50 | €12.90 |
| Softshell jackets | RG628 · Standard | €45.90 | €34.50 |
| Rain jackets | RT227 · Standard | €28.50 | €20.50 |
| Work trousers | RT308 · Standard | €39.90 | €31.90 |
| Caps | AT502 · Standard | €14.90 | €9.90 |
| Beanies | CB45 · Standard | €13.50 | €8.50 |
Per unit excl. VAT, printing included. The tier applies to the total quantity of your enquiry.
T-shirts for plumbing and heating companies
The Fruit of the Loom F130 at 150 g/m² is the basic piece for plumbing and heating fitters on bathroom work, boiler service and pipe laying.
Sweatshirts for plumbing and heating companies
The Fruit of the Loom F324 at 280 g/m² is the necessary warm layer over the T-shirt in the cold cellar, in unheated plant rooms and on winter emergency call-outs.
Hoodies for plumbing and heating companies
For plumbing and heating teams the BYBB001 hoodie is the clothing for trips between jobs and for breaks.
Polo shirts for plumbing and heating companies
The B&C BCPUI10 polo shirt is the first choice for the service adviser, the master and the emergency team in customer conversations.
Softshell jackets for plumbing and heating companies
The Regatta RG628 softshell is the transitional jacket for plumbing and heating fitters between vehicle and customer's house as well as for outdoor jobs such as gas line acceptance or underground pipe work.
Rain jackets for plumbing and heating companies
For outdoor jobs such as rainwater pipes, geothermal systems or gas tank deliveries in the rain, the Result Core RT227 belongs in the service vehicle.
Work trousers for plumbing and heating companies
The Result Workguard RT308 at 270 g/m² with knee-pad pockets in Navy or Black is ideal for plumbing and heating fitters for floor work in the bathroom, kneeling in the boiler room and work under washbasins.
Caps for plumbing and heating companies
In everyday plumbing and heating work the Atlantis AT502 cap is useful for outdoor jobs in summer, protects against dust in the cellar and against sunshine on the building site.
Beanies for plumbing and heating companies
For winter emergency call-outs and cold outdoor jobs in December and January, the Beechfield CB45 is the simple solution.
Ready-priced starter outfits
Emergency service set · 4 people
T-shirts for everyday work, a polo shirt for first customer visits and a softshell jacket for outdoor jobs – the lean basic set for a plumbing and heating emergency team.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 12 | €14.90 | €178.80 |
| Polo shirt BCPUI10 | 4 | €20.50 | €82.00 |
| Softshell jacket RG628 | 4 | €45.90 | €183.60 |
| Total excl. VAT | 20 | €444.40 |
€111.10 excl. VAT per person · gross total €528.84
Annual installation kit · 4 people
T-shirt, sweatshirt for cold cellars, work trousers with knee protection and beanie for winter jobs – the complete annual kit for a plumbing and heating installation team.
| Item | Quantity | Unit | Total |
|---|---|---|---|
| T-shirt F130 | 8 | €14.90 | €119.20 |
| Sweatshirt F324 | 4 | €26.50 | €106.00 |
| Work trousers RT308 | 4 | €39.90 | €159.60 |
| Beanie CB45 | 4 | €13.50 | €54.00 |
| Total excl. VAT | 20 | €438.80 |
€109.70 excl. VAT per person · gross total €522.17
Colours and logo
Navy is the standard colour for plumbing and heating companies – it suits the trade, makes limescale and rust look less dominant and looks professional on customer visits. Grey and anthracite complete the colour system for sweatshirts and jackets.
Navy on the F130
- Deep Navy
- Heather Navy
- Navy
Grey on the F130
- Heather Grey
- Light Graphite (Solid)
- Zinc (Solid)
Anthracite on the F130
- Light Graphite (Solid)
For plumbing and heating teams we recommend the company logo on the chest – clearly visible when the fitter rings the customer's doorbell or works in the bathroom. For the emergency service, the back print with company name and phone number is a direct marketing channel: neighbours who see the fitter in the street read off the number. On polo shirts for the master or customer service, embroidered quality is worthwhile.
Delivery time
How your order works
- Put together your needsChoose products, colours and approximate quantities – sizes can stay open for now.
- Estimate or enquirySave a PDF for internal approval or send it straight to us for review.
- Personal reviewWe check stock, logo and deadline. Production only starts after your written approval.
Frequently asked questions from plumbing and heating companies
Which trousers suit plumbing and heating fitters best?
The Result Workguard RT308 with knee-pad pockets is the first choice for plumbing and heating work. Kneeling under the washbasin, in the boiler room and on bathroom installations happens daily – knee-protection pads noticeably prolong the health of your knees. Black or Navy are the typical plumbing and heating colours for the trousers.
How quickly can we reorder in an emergency?
5 working days on the standard tariff from design approval. For genuine time pressure (e.g. a new fitter starts on Monday) there is 48-hour express (+25 %) or 24-hour express (+50 %). Since your design has already been checked after the first order, approval is usually quicker for reorders.
Can we print the company mobile number on the back print?
Yes – besides the company logo, the back print can also contain a web address, phone number or slogan. You supply the complete back design as a print design with the enquiry; we check it for suitability for printing.
Do you also offer different designs for fitters and the office?
Within one enquiry, one print design applies. For office staff with their own branding or without back print you can make a separate enquiry – the total pieces are then not added together. If one design applies to everyone, one enquiry with different models is enough.
We are a small plumbing and heating company with 3 fitters – is an order worthwhile?
From 10 pieces there are guide prices including printing with no set-up costs. For three fitters with three T-shirts plus one jacket and one polo shirt per person, you quickly reach 15–20 pieces – which is already in the 25-piece tier. Just put it together online and get a guide price.
Related industries
Put together teamwear for plumbing and heating companies
Put together your needs online and see the estimate instantly. Sizes can stay open – we check everything personally before production.